top of page

Manual OBD G500

Insert sim card

  • Use a needle/pin to open the sidesOBD G500.

1a.png
  • Insert SIMcardmicro size.

1b.png

installation

The OBD port is located at driver or passenger cabin, between the bottom edges dashboardthe left/right side of the driver to the limit of 300mm.

2a.png
2b.png

list of orders via sms

After the installation of OBD G500 is complete, send an SMS command to the SIM numbercard trackerYour GPS-mounted  . From every successfully sent command, there will be an OK configuration reply.

Your device can already track the location, and the device will only display the last location of your vehicle when your vehicle was stopped/parked.

Step 1: Set APN

Settings: APN,Local APN,APNName,APNPassword#

APN,telkomsel,wap,wap123#
APN,indosatgprs,indosat,indosat#
APN,www.xlgprs.net,xlgprs,proxl#
APN,3data,3data,3data#
APN,AXIS,axis,123456#

​

Step 2: Set IP/Domain, port

IP,www.gps228.com,8989#

​

No need to reset if you use the Secumore1 application.

Check configuration

PARAM#

​

Set number center for emergency reception

CENTER,A,158173888888#

​

Delete center number

CENTER,D#

​

Download the Google Maps link

WHERE#

Set the interval when ACC fires

TIMER,60# (in seconds)

​

Restart the device (restart) by remote

RESET#

​

Set time zone

GMT,E/W,8.00#

Example:

GMT,W,5,30#

(indicates timezone +5.5)

Voice monitoring

(*must use the registered number center !)

JT,M#

M: 0 or 1

0 means asking for a Google Maps link

1 means turn on voice surveillance mode

​

Back to factory settings

FACTORY#

** Please ensure that the SMS format used is correct. Any kind of error in the SMS format will cause the configuration to fail.​

Applicationstracking

Download app Secumore1on Google PlayStore and App Store.

When the application is installed, select the mode'User' to start login by entering IMEI number and default password: '123456'.

4a.png

Klik 'More' > 'Device Info' >'License Plate'. You can change username to replace IMEI as username.

4b.png

portal website (secumore1818.com)

By default, login with IMEI number and password '123456'.

'Admin Users' only for managers to be able to login to manage multiple devices at once.

Please call sales/distributor your account.

5.png
bottom of page